LNB Quad+Terestrial Inverto 626

Quad konvertor pre príjem z jednej družice pre až 4 nezávislé satelitné prijímače s možnosťou pripojenia antény pre príjem DVB-T.
DVB-S a DVB-T signál je vo všetkých štyroch výstupoch konvertora.
Na oddelenie DVB-T signálu od DVB-S signálu je nutné použiť koncové satelitné zásuvky (popr. priebežné) napr. FD-6 (FD-7).

Low Band Input Frequency Range 10.7~11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100~2150 MHz
LO Frequency 10.6 GHz
Noise Figure 0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy +/- 1.0 MHz max.
LO Temperature Drift +/- 3.0 MHz max.
Phase Noise @ 10K Hz -90 dBc / Hz Max.
Conversion Gain 55 dB Min.
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band) +/- 4 dB
Image Rejection 40 dB Min.
1 dB Compression Point (O/P) 0.0 dBm min.
Crosspolarization Isolation 22 dB Min.
Control Signals Ca (Vertical Polarization) 10.0 ~ 14.0 V
Control Signals Cb (Horizontal Polarization) 16.0 ~ 20.0 V
Control Signals Cc (Band Switching) 22 +/- 4 kHz
Frequency Range (MATV) 40 ~ 862 MHz
Insertion Loss (MATV) 13 dB
Isolation (MATV) 18 dB
Return Loss (MATV) 10 dB
Gain Flatness (MATV) 5 dB
In-Band Spurious - 60 dBc Max.
Output VSWR 2.5 : 1
Current Consumption 210 mA Max. @ 10 ~ 20 V
Operating Temperature - 30 ~ +60 °C
Output Impedance 75 ?
Output Connector F-Type
Weight 234 g